When securing a strong connection between two braided fishing lines, the Double Uni Knot is a tried and true method. The knot is strong and reliable for connecting braid to braid fishing line. This knot is especially useful when dealing with lines of similar or different diameters.
To tie the braid lines with the Double Uni Knot, you must overlap the two sections of the braided fishing line you want to join. Take one of the tag ends and create a simple loop by folding it back towards you.
Make approximately four to eight wraps for a secure and strong connection. Repeat the same process on the opposite side with the other tag end. Through this article, we’ll guide you through the steps to tie the Double Uni Knot perfectly. So keep reading.
How to Tie Braid to Braid Fishing Line: 8 Steps in Detail
Follow a few simple steps to tie braid to braid fishing line using the Double Uni Knot.
- Overlap the braid fishing lines
- Create a loop with one braid line
- Begin wrapping
- Complete the wraps
- Tighten the knot
- Repeat the process
- Final tightening
- Trim the tag ends
Step 1: Overlap the Braid Fishing Lines
Overlap the two sections of the braided fishing line to join them together. Ensure that there’s a sufficient overlap to create a strong connection. The overlap should be at least three inches long, but you can make it longer. Lay one section of the braid over the other, aligning the ends as closely as possible.
Step 2: Create a Loop with One Braid Line
Fold one of the tag ends of the braid line back towards you, forming a loop, to tie the braid to the braid fishing line. Hold the loop with your thumb and index finger, ensuring it stays in place.
Step 3: Begin Wrapping
Take the other tag end of the braid line and wrap it around both lines and through the loop. When wrapping, keep the wraps tight and close together for a secure connection.
It’s recommended to take approximately four to eight wraps for braided lines. However, if your lines have significantly different diameters, you may need to adjust the number of wraps accordingly.
As you wrap, maintain tension on both tag ends to prevent any slippage or loosening of the knot. This wrapping process creates a strong and reliable connection between the two braid lines.
Step 4: Complete the Wraps
To complete the wraps and secure the connection between the braid lines, thread the tag end through the second loop created in the previous step. Take the tag end and pass it through the second loop from the same side it entered, just like before.
Step 5: Tighten the Knot
To ensure a secure connection, tighten the knot by pulling on both tag ends and the standing lines with equal pressure. This will help to eliminate any slack and create a strong bond between the braided fishing lines.
As you pull on both ends, do so gently to avoid damaging the lines. The wraps should sit neatly side by side without overlapping or crossing over each other. This will ensure that the knot is properly formed and will hold up under pressure.
Step 6: Repeat the Process
Take your other tag end and repeat the same process as before, using an equal number of wraps to create a symmetrical and balanced connection. This is crucial in ensuring a secure and reliable knot.
This symmetrical approach is essential for preventing any weak points or potential failure. Remember to hold the lines taut as you wrap to ensure a tight and strong knot.
Once you have completed the wraps, tighten the knot by simultaneously pulling on both tag ends. Ensure that the knot is snug and secure before trimming any excess line.
Step 7: Final Tightening
To ensure maximum strength and reliability, tighten the Double Uni Knot by pulling both tag ends simultaneously until the knot is snug and secure.
Grasp both tag ends and the standing lines firmly, ensuring a secure grip. Apply steady pressure while pulling the tag ends in opposite directions.
The goal is to bring the two knots together, creating a robust connection. As you tighten the knot, be cautious not to pull too forcefully, as this may cause the line to break.
Step 8: Trim the Tag Ends
After tightening the Double Uni Knot, trim the braid’s tag ends to the braid fishing line. Using a sharp pair of scissors or clippers, carefully cut the tag ends as close to the knot as you prefer. Trimming the tag ends on your fishing setup reduces the chances of the ends getting caught on anything.
When Shouldn’t You Tie a Braided Fishing Line to Another Braided Fishing Line?
When tying two braided lines together, there are certain factors to consider.
Different brands and types of braided lines may have different textures, diameters, and strengths. Tying two different braided lines together without considering these factors can result in incompatibility issues and weak knots.
Abrasion and Friction
Braided lines are known for their high strength but are also susceptible to friction and abrasion for different braided lines. When tied directly together, the points of contact between the lines can create friction, weakening the lines and increasing the likelihood of failure.
Braided lines do not have much stretch, which means they don’t absorb shock as well as monofilament or fluorocarbon lines. Tying two different types of braided lines together can further reduce the shock-absorbing properties of the line, potentially causing line and tackle damage.
Is it okay to tie braid to braid fishing line?
You can safely tie braid to braid fishing line using a simple and effective knot. This method is commonly used when the fishing line gets frayed, breaks off on structure, or forms wind knots that can’t be untangled.
Tying braid to braid allows you to continue fishing without re-spooling your reel or wasting valuable fishing time. When tying braid to braid, choosing a reliable knot that will provide strength and durability is crucial.
What is the strongest braid to braid knot?
The strongest braid-to-braid knot is the Double Uni Knot (also known as Gallows Knot, Grinner Knot, or Duncan Loop). This knot is highly recommended for connecting braided fishing lines.
It’s a reliable knot that’s easy to tie and provides excellent strength and durability. The Double Uni Knot creates a double layer of wraps on both lines, ensuring a secure connection. This knot also maintains a high breaking strength and is effective for joining braided lines of different strengths or diameters.
Is the Double Uni Knot suitable for connecting braided lines of different diameters?
The Double Uni Knot is versatile and can connect braided fishing lines of varying thicknesses. However, adjusting the number of wraps accordingly is important to ensure a secure connection.
When connecting braided lines with different diameters, fewer wraps should be used for the thicker line, while more wraps should be used for the thinner line. This variation in the number of wraps compensates for the difference in diameter and helps to maintain a strong and reliable connection.
Is the Double Uni Knot suitable for monocarbon or fluorocarbon lines?
While the Double Uni Knot is primarily designed for connecting braided lines, it can also be used for mono or fluorocarbon lines. However, it’s worth noting that there are other knots, such as the Improved Clinch Knot or the Palomar Knot, which are better suited for mono or fluorocarbon lines.
The Double Uni Knot may not provide the same strength and reliability when used with these lines. Therefore, if you’re using mono or fluorocarbon lines, it’s recommended to use a knot specifically designed for those lines to ensure a secure connection.
Master the Knot for a Secure Braid to Braid Fishing Line Connection
Connecting two braid lines with different diameters using simple knots can fail, resulting in the loss of your catch. The Double Uni Knot is a reliable and strong method for tying braid-to-braid fishing lines. It’s suitable for connecting braided lines of different diameters and can also be used for mono or fluorocarbon lines.
So, whether you’re a seasoned angler or just starting, mastering this knot will ensure a secure connection and enhance your fishing experience. Remember, practice makes perfect, so don’t be afraid to try and ‘tie the knot’ confidently.